Want to receive product discounts and updates? Get it Here!

Troy Bilt Generator Repair

troy-bilt-generator-repair

Generators, especially those of a higher quality, should last for a long time before they start to act up. They aren’t indestructible, however, and sometimes their owners make mistakes that can cause all sorts of problems. If your Troy Bilt generator has begun acting strangely, or fails to work at all, you will need to do some basic troubleshooting.

Troy Bilt Generator Troubleshooting

generator-troubleshoot

There is a wide range of things that can go wrong with a generator, but some issues are more common than others. When Troy Bilt generators are in question, these issues mostly come down to the engine. In order to determine the cause, check if your device is showing any of the symptoms that follow.

Is your AC output unavailable even when the engine is running? If the answer is yes, the thing that is causing the problem might be one of the following four: an open circuit breaker, a defective cord, poor connection or a fault in the connected device.

Does your engine “bog down” when you connect the loads? If yes, you might want to check for the following issues: an overloaded generator, short circuit or too low engine speed.

If the engine on your Troy Bilt generator is failing to start, or starts but then runs badly or even shuts down, there could be any number of faults in the device. Some of them are easy to deal with, such as low oil level, a dirty air cleaner or a fuel valve that is in “Off” mode. Others, however, will need a more elaborate fixing, such as a spark plug wire that got disconnected from the spark plug or an engine that has lost its compression.

Troy Bilt Generator DIY Repair

generator-diy-repair

If your generator is failing to start or work properly, you can always try to fix it yourself. Here are some tips on how to resolve the above mentioned faults.

If the AC output is unavailable, try resetting the circuit breaker or connecting another device to your Troy Bilt generator. For engines that are “bogging down,” try to disconnect the electrical load. And if the engine has trouble starting of operating properly, fill the crankcase with oil, clean out the air cleaner and switch the fuel valve to “On” position. If none of this works, try connecting the wires to the spark plug.

Troy Bilt Generator Local Repair Shops and Certified Repair Service

certified-repair-service

If you continue having problems with the generator even after you have done all of the above, call a local repair shop to ask for advice and whether they can help you with your problem. Some of these issues will have to be brought to the attention of a certified Troy Bilt repair service, which you can find by clicking on the “Service” button on the official website. There is a special section for those who need to have their pressure washers and generators looked at. » Troy Bilt Generator support

Popular Troy Bilt Generator Models

popular-generator-models

The company has a couple of different models, and these are the most popular ones: the 7000 Watt XP Series Portable Generator and the 6250 Watt Portable Generator. While the former boasts 7,000 running and 10,500 starting Watts, the later has 6,250 running and 8,500 starting.

As you can see, you have plenty of options from which to choose if there is something wrong with your Troy Bilt generator. Doing some basic troubleshooting is fairly easy, but for some problems you will still need to contact a certified repair service.

Looking for Troy Bilt generator parts? Visit this page and find out where to buy cheap and genuine Troy Bilt generator parts.